塑料襯板
Plastice Gasket
我公司生產的單繩纏繞式提升機塑料襯板(簡稱塑襯),是目前替代木質滾筒襯板的良選,該產品經過0.8-5.0m各類型的單繩礦井提升機十余年的使用和檢測證明,塑襯與木襯相比有如下特點:
1、機械強度高、使用壽命長
抗壓強度比木襯高7-10倍,不會出現壓碎、繩槽搓平現象,而且使用壽命高于木襯5倍以上。
2、適應范圍廣
抗干裂耐潮濕性能高,不會出現木襯的干裂、腐爛等現象,特別適合礦井淋水大、腐蝕性強等惡劣環境及井下條件使用。
3、比重輕、不吸水
比重為0.98g/cm,比吸水后的木襯還輕,因此更換塑襯后不會增加設備轉動慣量和無功功率。
4、模壓成型、繩槽表面光滑
安裝方便,鋼絲繩排列整齊,不會出現“咬繩、跳繩”等現象,大大延長鋼絲繩的使用壽命。
提升機塑襯規格尺寸參數表/Plastice Gasket Dimension Datasheet
Our single-rope winding hoist plastice gasket, is now the best choose to replace wooden roller plate. More than ten years usage and test of 0.8-5.0m different kinds single rope hoist proves this product has below characters.
1.Hgh mechnical hardness, long lifetime.Compressive strength is more than 7 to 10 times the wood liner, crashing, score floating will not happen and the lifetime is 5 times longer than wooden gasket.
2.Widely usage.High resistance to cracking and moisture resistance, without weather-shack, rotting like wood liner, especially suitable to large mine watering, strong corrosion and other bad environment as well ad undergrand conditions.
3.Light Proportion and No absorbing water.The proporaion is 0.98g/cm, is lighter than wooden after absorbing water.So it will not increase rotational inertia and reactive power.
4.Compression molding, smooth scrope surface.Easy to asemble, steel wire is placed in order to avoid cutting rope and rope score phenomenon. It highly prolongs the lifetime of steel wire.